product image
product image
product image
product image
product image
product image
product image
product image

TAC 30

  • MSRP: $
  • $

TAC 30 Specs

Receiver Material Receiver Length Receiver Diameter Headspace Bolt Diameter Bolt Design Bolt Stop Bolt Throw Bolt Material Bolt Coating Firing Pin Extractor/Ejector Recoil Lug
416R Stainless 9.165" 1.4" action screw spacing is 8.715". Front screw to rear recoil lug is 1.365" 1.000" +/- .001"; 0.747" One piece fluted on top and sides, with a straight handle. Large knob with 5/16 x 24 thread. On side of receiver opposite bolt handle above the stock line. 90 degrees 4140 Black Nitride Fluted Stainless Steel, 0.067" diameter tip Modified M16 type extractor, Rem 700 style pin ejector 416R Stainless parallel sided or tapered. .187" (Rem 700 standard) or .300" produced in house and surface ground to .0002" tolerance
product image

Action Weights

Body, Bolt, Rail, Recoil Lug, and Trigger Pins

35.9 oz

Action Body

19 oz

Bolt Only

13 oz

For the next generations

Have a question? We'd love to talk with you.

Contact us
category spotlight image
category spotlight image
category spotlight image
category spotlight image

Tenon Threads

1.125-16 TPI UN-3B

Threads are made with a single point boring bar and indexed to top center of action.

This allows any barrel ever fitted to a Stiller Action to be screwed onto any other Stiller Action without need for re-headspacing or re-indexing.

Not likely Very likely
Back to top