This product option is currently unavailable.
The Predator V is a single shot short action with a coned bolt face designed for competition use. It is a 416R stainless steel action with a Remington 700 style footprint. THe Predator V is a right bolt left port single shot action and available only in short action with .223 (with ejector) and .308 (without ejector) bolt faces. The .223 bolt face use the Sako style extractor, while the .308 uses a modified M16 type. The Predator V has a number of features that
factory actions lack. It uses the most dependable extractor available today with an enlarged primary extraction camming surface. It uses #6 screws for scope base mounting. The one-piece bolt is, hand lapped to the action and fluted for better function. The firing pin is fluted for faster lock time and is fully supported within the bolt body. The bolt handle is threaded for the bolt knob of choice.
Receiver Material: 416 Stainless hardened to 42 Rockwell Receiver Length: 9.155” Receiver Diameter: 1.35” (Remington 700) Headspace: Short, Medium, Long, Wraith – 1.100” Headspace tolerance is held to +/- .001” Tenon threads: Threads are made with a single-point boring bar and indexed to the top center of the action. This allows any barrel ever fitted to a Stiller Action to be screwed onto any other Stiller Action without any need for re-headspacing or re-indexing. Bolt Design: .700” diameter. One piece fluted on top and sides but not the bottom so that flutes will not interfere with magazine lips. TAC 30, TAC 300, and PREDATOR actions have a slightly swept bolt handle. TAC and PREDATOR actions have a large knob with 5/16 x 24 thread. Aftermarket knobs can be swapped out by user or gunsmith.
Bolt Stop: On side of the receiver opposite bolt handle above the stock line Bolt Throw: 90 degree Bolt Material: Chrome Molly hardened to 42 Rockwell Bolt Coating: Proprietary double layer coating makes them as smooth as glass Firing Pin: Fluted Stainless Steel, .068 diameter tip, Chrome silicon spring Extractor/Ejector: Modified M16 type extractor, Rem 700 style pin ejector Recoil Lug: 416R Stainless parallel sided or tapered. .187” (Rem700 standard) or .300” produced in house and surface ground to .0002” tolerance.
Have a question? We'd love to speak with you.
https://shop.horizonfirearms.com/warranty
Submit photos and videos of adventures with your Horizon product.
https://shop.horizonfirearms.com/in-the-field
Keep up to date with all things Horizon by following our social media pages.
https://www.instagram.com/horizonfirearms/
https://www.facebook.com/horizonfirearms