PREDATOR LONG LEFT SINGLE SHOT STANDARD
Designed to be used for both hunting and competition, the Predator action is a 416R stainless steel action with a Remington 700-style footprint. It is available in both single shot and repeater versions with both right and left bolt. Long actions have 308 or magnum bolt faces with a modified M16 type extractor. The Predator has a number of features that factory actions lack. It has an extended magazine well that accommodates Wyatt Outdoors extended magazine boxes for the handloader who likes to seat his
bullets longer than factory ammo. It uses the most dependable extractor available today and has an enlarged primary extraction camming surface. It uses #8 screws for scope base mounting. The bolt is forged from a single piece of steel, hand lapped to the action, and fluted for better in-field function. The firing pin is fluted for faster lock time and is fully supported within the bolt body. The bolt handle is threaded for the bolt knob of choice.
Receiver Material: 416 Stainless hardened to 42 Rockwell
Receiver Length: 8.700”
Receiver Diameter: 1.35” (Remington 700)
Headspace: Short, Medium, Long, Wraith – 1.100” Headspace tolerance is held to +/- .001”
Tenon threads: Threads are made with a single-point boring bar and indexed to the top center of the action. This allows any barrel ever fitted to a Stiller Action to be screwed onto any other Stiller Action without any need for re-headspacing or re-indexing.
Bolt Design: .700” diameter. One-piece fluted on top and sides but not the bottom so that flutes will not interfere with magazine lips. Predator actions have a swept bolt handle. They come with a small bolt knob that is threaded to accommodate aftermarket knobs.
Bolt Stop: On side of the receiver opposite bolt handle above the stock line
Bolt Throw: 90 degree
Bolt Material: Chrome Molly hardened to 42 Rockwell
Bolt Coating: Proprietary double layer coating makes them as smooth as glass
Firing Pin: Fluted Stainless Steel, .068 diameter tip, Chrome silicon spring
Extractor/Ejector: Modified M16 type extractor, Rem 700 style pin ejector
Recoil Lug: 416R Stainless parallel sided or tapered. .187” (Rem700 standard) or .300” produced in house and surface ground to .0002” tolerance.